Length 23.5cm x Width 5.2cm x Height 14.1cm
a- Length 23.5cm x Width 5.2cm x Height 7.9cm
b- Length 15.7cm x Width 2.4cm x Height 0.7cm
c- Length 17.7cm x Width 3.5cm x Height 0.4cm
Torus bead molding plane comprised of three parts, a wooden rectangular body portion with an angled cutout through the middle and a torus bead profile on the sole (a), a wooden wedge that tapers to a point at the bottom and is rounded at the top (b), and an iron with a wide blade that has a curved cutout to match the torus bead profile of the main body part (c). The wedge and the iron fit together inside the cutout in the plane, and the wedge holds the iron in place as the iron cuts the wood below. Stamped on the top of the plane towards the heel is "P. TOLL". Stamped on the toe edge is "P.TOLL" stamped four times, as well as "I BLOWER", and "DRYBURGH N. E. HOPE ONT." Stamped on the heel is "I BLOWER", and "1 1/4".
A less common variation of the bead plane is the torus bead or the astragal. The difference is that on a regular side bead, the bead is cut with only enough material removed on the inside of the cut, to shape the bead. With the astragal there is extra material removed on the inside of the cut so that the bead stands out.
